The Bluetooth Mesh Standard: An Overview and Experimental Evaluation

Mesh networks enable a many-to-many relation between nodes, which means that each node in the network can communicate with every other node using multi-hop communication and path diversity. As it enables the fast roll-out of sensor and actuator networks, it is an important aspect within the Internet of Things (IoT). Utilizing Bluetooth Low Energy (BLE) as an underlying technology to implement such mesh networks has gained a lot of interest in recent years. The result was a variety of BLE meshing solutions that were not interoperable because of the lack of a common standard. This has changed recently with the advent of the Bluetooth Mesh standard. However, a detailed overview of how this standard operates, performs and how it tackles other issues concerning BLE mesh networking is missing. Therefore, this paper investigates this new technology thoroughly and evaluates its performance by means of three approaches, namely an experimental evaluation, a statistical approach and a graph-based simulation model, which can be used as the basis for future research. Apart from showing that consistent results are achieved by means of all three approaches, we also identify possible drawbacks and open issues that need to be dealt with

A hybrid indoor localization solution using a generic architectural framework for sparse distributed wireless sensor networks

Indoor localization and navigation using wireless sensor networks is still a big challenge if expensive sensor nodes are not involved. Previous research has shown that in a sparse distributed sensor network the error distance is way too high. Even room accuracy can not be guaranteed. In this paper, an easy-to-use generic positioning framework is proposed, which allows users to plug in a single or multiple positioning algorithms. We illustrate the usability of the framework by discussing a new hybrid positioning solution. The combination of a weighted (range-based) and proximity (range-free) algorithm is made. Roth solutions separately have an average error distance of 13.5m and 2.5m respectively. The latter result is quite accurate due to the fact that our testbeds are not sparse distributed. Our hybrid algorithm has an average error distance of 2.66m only using a selected set of nodes, simulating a sparse distributed sensor network. All our experiments have been executed in the iMinds testbed: namely at "de Zuiderpoort". These algorithms are also deployed in two real-life environments: "De Vooruit" and "De Vijvers"

Experimental evaluation of UWB indoor positioning for indoor track cycling

Accurate radio frequency (RF)-based indoor localization systems are more and more applied during sports. The most accurate RF-based localization systems use ultra-wideband (UWB) technology; this is why this technology is the most prevalent. UWB positioning systems allow for an in-depth analysis of the performance of athletes during training and competition. There is no research available that investigates the feasibility of UWB technology for indoor track cycling. In this paper, we investigate the optimal position to mount the UWB hardware for that specific use case. Different positions on the bicycle and cyclist were evaluated based on accuracy, received power level, line-of-sight, maximum communication range, and comfort. Next to this, the energy consumption of our UWB system was evaluated. We found that the optimal hardware position was the lower back, with a median ranging error of 22 cm (infrastructure hardware placed at 2.3 m). The energy consumption of our UWB system is also taken into account. Applied to our setup with the hardware mounted at the lower back, the maximum communication range varies between 32.6 m and 43.8 m. This shows that UWB localization systems are suitable for indoor positioning of track cyclists

Leveraging upon standards to build the Internet of things

Smart embedded objects will become an important part of what is called the Internet of Things. However, the integration of embedded devices into the Internet introduces several challenges, since many of the existing Internet technologies and protocols were not designed for this class of devices. In the past few years, there were many efforts to enable the extension of Internet technologies to constrained devices. Initially, this resulted in proprietary protocols and architectures. Later, the integration of constrained devices into the Internet was embraced by IETF, moving towards standardized IP-based protocols. Long time, most efforts were focusing on the networking layer. More recently, the IETF CoRE working group started working on an embedded counterpart of HTTP, allowing the integration of constrained devices into existing service networks. In this paper, we will briefly review the history of integrating constrained devices into the Internet, with a prime focus on the IETF standardization work in the ROLL and CoRE working groups. This is further complemented with some research results that illustrate how these novel technologies can be extended or used to tackle other problems.The research leading to these results has received funding from the European Union's Seventh Framework Programme (FP7/2 007-2013) under grant agreement n°258885 (SPITFIRE project), from the iMinds ICON projects GreenWeCan and O’CareCloudS, and a VLI R PhD scholarship to Isam Ishaq

Wi-PoS : a low-cost, open source ultra-wideband (UWB) hardware platform with long range sub-GHz backbone

Ultra-wideband (UWB) localization is one of the most promising approaches for indoor localization due to its accurate positioning capabilities, immunity against multipath fading, and excellent resilience against narrowband interference. However, UWB researchers are currently limited by the small amount of feasible open source hardware that is publicly available. We developed a new open source hardware platform, Wi-PoS, for precise UWB localization based on Decawave’s DW1000 UWB transceiver with several unique features: support of both long-range sub-GHz and 2.4 GHz back-end communication between nodes, flexible interfacing with external UWB antennas, and an easy implementation of the MAC layer with the Time-Annotated Instruction Set Computer (TAISC) framework. Both hardware and software are open source and all parameters of the UWB ranging can be adjusted, calibrated, and analyzed. This paper explains the main specifications of the hardware platform, illustrates design decisions, and evaluates the performance of the board in terms of range, accuracy, and energy consumption. The accuracy of the ranging system was below 10 cm in an indoor lab environment at distances up to 5 m, and accuracy smaller than 5 cm was obtained at 50 and 75 m in an outdoor environment. A theoretical model was derived for predicting the path loss and the influence of the most important ground reflection. At the same time, the average energy consumption of the hardware was very low with only 81 mA for a tag node and 63 mA for the active anchor nodes, permitting the system to run for several days on a mobile battery pack and allowing easy and fast deployment on sites without an accessible power supply or backbone network. The UWB hardware platform demonstrated flexibility, easy installation, and low power consumption

Enabling the web of things: facilitating deployment, discovery and resource access to IoT objects using embedded web services

Today, the IETF Constrained Application Protocol (CoAP) is being standardised. CoAP takes the internet of things to the next level: it enables the implementation of RESTful web services on embedded devices, thus enabling the construction of an easily accessible web of things. However, before tiny objects can make themselves available through embedded web services, several manual configuration steps are still needed to integrate a sensor network within an existing networking environment. In this paper, we describe a novel self-organisation solution to facilitate the deployment of constrained networks and enable the discovery, end-to-end connectivity and service usage of these newly deployed sensor nodes. By using embedded web service technology, the need of other protocols on these resource constrained devices is avoided. It allows automatic hierarchical discovery of CoAP servers, resulting in a browsable hierarchy of CoAP servers, which can be accessed both over CoAP and hypertext transfer protocol